|
Aquabot
Turbo®
is fully-automated independent inground pool cleaner
with computerized guidance system that automatically
maneuvers around abstacles and reverses path. The Turbo®
does not need any hoses, hook-ups, booster pumps or
suction lines and requires very minimal maintenance
and does all the vacuuming, brushing, scrubbing and
backwashing for you!
The
Aquabot Turbo® comes with built-in Total
Filtering System, including debris-gathering rubber
brushes and tracks, large intake ports, a powerful filter
pump (up to 4200 gallons per hour) and the removable
and reusable filter bag. It is equipped with its own
transformer, operationg on only 24 volts, and has a
fully independent on board filters system. It is recommended
for pools up to 20ft. by 40ft, will filter 4000gal./hr.,
and cover 3500 sq. ft./hr. The Aquabot Turbo®
included stronger motors that would increase the filtering
power of the Mark V 50%, from 2700 gallons per minute
to 4200, and the pool surface coverage more than 100%,
from 3000 to 4200 square feet/hour. In the ensuing years,
several remote control versions were added to the line,
all of which included the basic Aquabot Turbo chassis
and motors.
The
The Aquabot Turbo® includes
a seven (7) hour internal timer, a 60' self-floating
power cord, and the strongest filter and drive motors
in the industry. With its added speed and power, this
robotic cleaner can easily handle a pool as large as
60' in length.
|
|
The
Aquabot Turbo® Pool Cleaner
folds in the much cooler water found near the pool bottom
with the much warmer surface water, balancing the overall
temperature of the entire pool. This vastly reduces
evaporation, saving thousands of gallons of water (and
chemicals).
The
Aquabot Turbo® Pool Cleaner
uses as little as 1/10th the amount of electricity needed
to operate other major pool filters. It reduces main
filter use by up to 80%, drastically cutting down on
the need for maintenance and extending its life dramatically.
|
