|
Polaris
360 Pool Cleaner Parts
|
Polaris
Pool Cleaner Parts
|
Polaris
380/360 Pool Cleaner Part
|
| 9-100-1014 |
Polaris
All Purpose Bag for Polaris 380/360 |
| 9-100-1015 |
Polaris
380/360 Fine Mesh Debris Bag for Sand and Silt |
| 9-100-1021 |
Polaris
360/380 debris bag w/ Zipper |
| K-13 |
Polaris
280 all purpose bag w/ zipper |
| 9-100-1152 |
Polaris
380 Housing, Turbine Upper |
| 9-100-1114 |
Polaris
380/360/340 Hub Cap |
| 9-100-1152
|
Polaris
380 Housing, Turbine Upper |
| 9-100-5107 |
Polaris
380/360/340 E-clip, stainless steel wheel |
| 9-100-1108 |
Polaris
380/360/340 BEARING WHEEL |
| C10 |
Polaris
380/280/180/360 Tire - White |
| 9-100-1008 |
Polaris
380/360 Wheel Double Side |
| 9-100-1017 |
Polaris
380/360 Belt Kit |
| 9-100-7011 |
Polaris
380/360/340 Shield Bearing |
| 9-10-1005 |
Polaris
360 Frame Assembly EXCHANGE ONLY |
| 9-100-5125 |
Polaris
380 Screw 8-32x1/2 stainless Steel Pan Head |
| 9-100-1139 |
Polaris
380/360 Axile Block Kit (front and rear) |
| 9-100-1010 |
Polaris
380 BELT DIVIDER TRANSFER PULLEY |
| B-25 |
Polaris
180/280/380 ORIFICE TIP W/ TIP GUARD |
| 9-100-1007 |
Polaris
380/360 TRANSFER PULLEY DRIVE SHAFT |
| 9-100-5115 |
Polaris
380/360/340 SCREW COVER PAN Head stainless steel |
| 9-100-5130 |
Polaris
380/360 Lock Washer Axle Block |
| 9-100-1132 |
Polaris
380/360 DRIVE TRAIN GEAR KIT |
| 9-100-1103 |
Polaris
380/360 TURBINE WHEEL W/BEARING |
| 9-100-1116 |
Polaris
380/360 WHEEL SINGLE SIDE |
| C-131 |
Polaris
380 THRUST JET REPAIR KIT |
| 9-100-7008 |
Polaris
380/360 SWEEP HOSE BARB COMPLETE |
| B-20 |
Polaris
180/280/380/360 ADJUSTMENT SCREW SWEEP HOSE |
| B-15 |
Polaris
180/280/380/360 Sweep Hose Attachement Clamp |
| 9-100-9004 |
Polaris
380 BASE WEIGHT |
| 9-100-7170 |
Polaris
180/280/380/360 HOSE CLAMP WATER MGMT |
| 9-100-7009 |
Polaris
380/360 Jet Retainer Kit 2 pk. |
| 9-100-7010 |
Polaris
380 WATER MANAGEMENT SYSTEM |
| 9-100-1155 |
Polaris
380/360 TURBINE HOUSING LOWER |
| 9-100-3105 |
Polaris
380/280/180/360 SWEEP TAIL SCRUBBER |
| 9-100-5132 |
Polaris
380/360 O´RING TIMER |
| 9-100-7030 |
Polaris
380/360 TOP & BASE ASSY F/360/380 (1) |
| 9-100-7003 |
Polaris
380 FEED PIPE TIMER BLANK ASSY WHT |
| A-20 |
Polaris
380/280/180/360 FLOAT HEAD WHT |
| B-5 |
Polaris
380/280/180 SWEEP HOSE COMPLETE |
| G-52 |
Polaris
380/280/180 in-line back-up valve |
|
|
| CPVC2 |
High
Temperature resistant CPVC nipple - 2" threaded |
| CPVC15 |
High
Temperature resistant CPVC nipple - 1.5" threaded |
| R172288 |
Pentair
corrosion resistant 1-1/2" & 2" SLIP spring check
valve |
| MMNTR |
Dwyer
Slack-Tube Manometer - with rugged case |
|
|
|
|
Replacement
Parts and Accessories for Polaris 360 cleaner
Click
on circled part numbers to view/buy a part

Polaris
360 cleaner parts diagram
- PosiTrax
Tire [Part
# C13] available as an accessory for fiberglass and tile pools.
Use
only Original Polaris replacement parts - All our Polaris 360 pool
cleaner parts are original Polaris parts
WARNING:
USE OF POLARIS 360 IN A VINYL LINER POOL
Certain vinyl liner patterns are particularly susceptible to rapid
surface wear or pattern removal caused by objects coming into contact
with the vinyl surface, including pool brushes, pool toys, floats,
fountains, chlorine dispensers, and automatic pool cleaners. Some
vinyl liner patterns can be seriously scratched or abraded simply
by rubbing the surface with a pool brush. Ink from the pattern can
also rub off during the installation process or when it comes into
contact with objects in the pool. Polaris is not responsible for,
and the Limited Warranty does not cover, pattern removal, abrasion
or markings on vinyl liners.
|
Polaris
Vac-Sweep 360 360 Limited Warranty
This
one year limited warranty is extended to the original consumer
purchaser of this Polaris Vac-Sweep 360 Automatic Pool Cleaner
manufactured by Polaris Pool Systems, Inc., from date of manufacture
of the unit as established by the serial number, or one year
from date of purchase with proof of purchase, whichever is
later. Polaris warrants this product, including all parts
and components thereof, to be free of defects in material
and workmanship. Normal replacement items such as bags, tires,
sweep hoses or sweep hose scrubbers which have been worn out
by use or improper installation are not covered by this warranty.
The Polaris 360 frame is warranted for a period of ten years.
This limited warranty does not apply if the failure is caused
or contributed to by any of the following: improper handling,
improper usage, improper storage, winter freezing, abuse,
improper installation, removal of the UWF filter screen, unsuitable
application of the unit, improper maintenance, lack of reasonable
and necessary maintenance, damage in transit or during installation,
or damage from repairs/alterations made or attempted by anyone
other than Polaris or one of its Authorized Service Centers.
Authorization to return a unit or part to the plant of manufacture
must be obtained from the Polaris Customer Service Department.
Check with your dealer for the local procedure before exercising
this warranty. If further directions or instructions should
be required, contact the Customer Service Department at 1-800-VAC-SWEEP
(USA and Canada only) or (760) 599-9600. Be sure to insure
the shipment against loss or damage in transit. This limited
warranty is valid only in the United States of America, Canada
and Australia, and it does not apply to Polaris Vac-Sweep
360 Automatic Swimming Pool Cleaners sold or installed in
any other country. Polaris Vac-Sweep 360 Automatic Pool Cleaners
sold in the United Kingdom are warranted for a period of two
years from date of invoicing to the first user.
|
Other
Polaris Cleaner Parts
|
Polaris
380 Parts
|
Polaris
Booster Pump Parts
|
|
|
|
| |
|
|
|
Polaris
booster pump:
|
|
|
|
Polaris
Halcyon Booster Pump - Quieter:
|
|
|
| |
|
|
|
|
Add
the Zodiac Leaf Catcher to your pool cleaner for added level
of contorting clogging and protecting your pump |

|
|