AQUA
Swimming Pool Supplies
Control Systems

 

Jandy AquaLink RS Wireless Pool and Spa Control System

- -

The Jandy AquaLink RS Wireless system comes with a 2.4 GHz RF (Raidio Frequency) transmitter powerful enough to cover 300 ft. of your backyard area and gather operational status of your pool and spa equipment without loss of control system features. This state-of-the-art wireless system transmits through walls and around corners and does not require line of sight for operation.

Jandy AquaLink® RS Wireless Pool and Spa Control System

 

About AquaLink RS Home Automation: Now you can integrate Jandy's AquaLink RS pool/spa control system into your whole home network.

Installation of the Jandy AquaLink RS wireless system is simple and takes half the time of a wired system. Ideal for homes with existing decks and landscaping.

No wiring between the equipment pad and the control panel - that means no trench, conduit or wire expenses! whch also translates to lower installation costs

The portable desktop unit plugs in anywhere - no more cutting into walls or crawling around through attics.

How to Select a Wireless System

To enjoy the many benefits of wireless automation, purchase an AquaLink RS OneTouch Control System with the following additional wireless kit:

AquaLink RS Wireless kit
A - OneTouch Wireless Cradle
- Black desktop cradle
- Faceplate with black buttons
- Tranceiver
- Antenna
- Transformer with cable
B - Power Center wireless J box
- Water tight J box
- Antenna
- 4 conductor wire, 20 ft.

 

Installation Basics

Step 1: Order an AquaLink RS OneTouch System and Power Center

Step 2: Order Wireless Kit # 8082

Step 3: Connect Power Center transceiver J box to the Power Center via the red 4-pin terminal bar and mount next to the Power Center

Step 4: Install OneTouch PCB from AquaLink RS System into Wireless cradle and plug transformer into standard outlet.

AquaLink RS Wireless kit connection

 

Specification:

Power Supply: 120 volts AC, 60 Hz, 3 amps. Contact Rating: (high volt.) 25 amps, 3 HP @ 240 volts AC, 1.5 HP @ 120 volts AC, 1500 watts incandescent. Contact Rating: (low volt): Class two, 1 amp @ 24 volts AC. Emergency Service Switches: All circuits.

AquaLink RS wireless kit installation and specification

Tranceiver will transmit through walls and around corners (does not require line of sight. Steel framing, aluminum siding, wrought iron, cyclone fences, and leaded glass may prevent communication between the AquaLink RS Control Panel and The Power Center.

 

Jandy's Next Generation, wireless pool and spa controller is here

— 900 MHz Wireless Technology

— Control of Filter Pump, Heater, and up to 7 Auxiliaries

— 3 Pool and Spa Combination Models (PS4, PS6 & PS8)

— 2 Pool or SPa Only Models (P4 and P8)

— Display of air and water temperature

Water Resistant, Floating Hand-held

  Pool Digital Assitant (PDA) System Sub-Assembly
1
PDA Handheld Remote
1
Outdoor Transceiver J-box
1
Power Center PCB
2
JVA Valve actuators (with Pool/Spa Combination Only)
2
Temperature Sensors (additional relays Model dependent)
1
Standard Power Center - Sub Panel Power Center (sold separately)

 

Model
Pool Only
Pool & Spa
Filter & Pump
Heater
1-3 Aux.
1-5 Aux.
1-7 Aux
Buy
PDA-P4
                 
PDA-P8
                 
PDA-PS4
                 
PDA-PS6
                 
PDA-PS8

 

Options and Accessories


6581
Jandy 3 H.P. Relay DPST (Double Pole, Single Throw)
     
Jandy SpaLink RS 8-function Spa Side Remotes. Control filter pump, heater, solar, spa and 7 auxiliary circuits. For use with any AquaLink RS control, above water use only.
150 ft.
200 ft.
300 ft.
White
Gray
Black


     
SpaLink FLush Mud Box L: 7 1/4" x W: 3 5/16" x H:2 3/4"
     

4424
Jandy Valve Actuator, 24 volt Automates any 2-way and 3-way diverter valves for pool/spa. Can rotate 180 degree and compatible with all pool/spa diverter valves
     

6796
Jandy 2-speed motor relay kit, provides control of a high voltage, 2-speed pump motor. DPDT (Dual Pole, Duoble Throw) 20 Amps. max 2 H.P. Max at 220 VAC
     

7620
Jandy Generic Serial Adapter - provides interface between AquaLink RS control and RS232 "intelligent" home automation system.
     
Jandy 7092 AquaLink RS 8 Conversion kit
     
Jandy Pool Link Dual Timer Control System
     
Wireless Outdoor J-box kit

 

 
Product Categories
 

- Pool Cleaners
- Pool Heaters
- Pool/Spa Pumps
- Pool/Spa Filters
- Pool Filter Valves
- Pool Skimmers

- Chlorinators
- Thermometers
- Brushes
- Rakes/Skimmers
- Pool/Spa Lights
- Timer Clocks
- Vacuum Heads
 

- Pool Lounges
- Pool Basketball
- Pool Valuable
- Pool Baby floats
- Swim Boards
- Pool Mattresses