| Digital
Control |
|
|
| Microprocessor-controlled
Thermostat |
|
|
| The
Raypak Digital gas heater is equipped with a microprocessor-based
control center. This control allows you to set your pool or spa temperature
precisely at your preferred setting just by pressing an up or down
temperature control button. The digital display gives you a constant
readout of your water temperature. |
|
 |
|
|
|
| Self-Diagnostic |
|
Remote-Compatible |
| Troubleshooting
a Raypak gas heater has never been easier. The Raypak Digital has
on-board diagnostic controls that let the user and the service professional
know what is going on with the heater at all times. In the unlikely
event that a problem develops, the digital display easily points out
the problem and the probable cause. It's like having a service technician
built into every Raypak Digital heater. |
|
The
Raypak Digital is compatible with most major brand pool control and
remote systems on the market today. Any two- or three-wire remote
can connect to the Raypak Digital heater and be integrated into the
pool control system of your choice. |
| |
|
|
| Heat
Exchanger |
|
|
| Condensation-Free
Operation |
|
|
| Both
water temperature and flow rate inside the heater are controlled to
help eliminate condensation, soothing and scale buildup that cab shorten
the life of a heater. Raypak engineered the Unitherm Govenor Specifically
for pool heater application, regulating low-temperature incoming water
to help reduce condensation. For over 30 years, Raypak has led the
industry, setting the standard for condensation protection. |
|
 |
| |
|
|
| Rust-Free
Waterways |
|
|
| The
Raypak Digital, with polymer headers, is equipped with an integral
copper finned-tube heat exchanger and stainless steel tube sheets.
This unique construction guarantees rust-free operation, especially
important when heating spas and smaller pools. Even the smallest details
such as the studs and nuts are made out of stainless steel. The Payoff?
A heater that will last years after year and can easily be services
if the need should ever arise. |
|
 |
| |
|
|
| Burners |
|
|
| Stainless
Steel Burners |
|
|
| Burner
design is a critical component in any gas heater. The stainless steel
burner system used in the Raypak Digital is inherently forgiving and
extremely robust. The burner is self-adjusting to compensate for gas
pressure fluctuations, allowing the heater to always burn clean and
safe. |
|
 |
| |
|
|
| Fan-Assisted
Combustion |
|
Pilot
Ignition |
| Not
all low NOx heaters are made the same. The Raypak Low NOx design uses
a fan to provide cool, controlled combustion air to the burners. Other
brands use a fan to pull hot flue gases through the heater. The RAypak
design allows the heater to outperform all others during cold starts
and provide longer components life. |
|
The
Raypak Digital use a spark-to-pilot ignition system. This is the most
reliable and robust ignition system available, an industry-proven
standard for over 20 years. |
| |
|
|
| Copper
Fin Tube - (Standard) |
|
|
| The
Raypak Digital is built with the highest quality integral copper fin
tube available. Copper is well known for it's ability to efficiently
transfer heat, and is an excellent choice for pool and spa heater
exchangers, where the water chemistry is properly maintained. |
|
 |
| |
|
|
| ASME
Copper Fin tube - (Optional) |
|
|
| The
Raypak Digital ASME gas heater is equipped with .062" wall integral
copper finned tubes. This tubing is approximately 50% larger in wall
thickness than standard tubing, providing additional resistance to
wear from chemical corrosion. The Raypak Digital heater is also available
in an optional ASME version. Raypak has inspectors on-site daily performing
certifications for our pool heater and commercial boiler production
that may require ASME. Being in the boiler business for over 50 yearstruly
,ask Raypak the leader for your commercial needs. Why ASME? Most local
codes require that public pools, pools that are in condominiums, apartment,
or other commercial applications, be ASME certified. ASME stands for
American Society of Mechanical Engineers, a non-profit group which
sets many industrial and manufacturing standards. A pool heater that
is made to ASME standard must perform to a set of specifications as
determined by ASME, specifically in relation to the operating water
pressure the application can handle. Each and every ASME heat exchanger
that goes into RAypak heater is certified by a state inspector to
make sure it complies with ASME codes for pool heaters. |
|
|
| |
|
|
| Glass-Lined
Cast Iron Headers |
|
|
| Raypak
has applied it's years of commercial boiler experience to the design
of the cast iron glass-lined header. A metal header design allows
for the higher working pressures required by ASME. Only after the
material meets the stress anaysis and metal composition tests is it
approved for use in an ASME unit |
|
 |
| |
|
|
| Cupro-Nickel
Fin Tube - (Optional) |
|
|
| Raypak
heaters are available with an optional cupro-nickel fin tube heat
exchanger for added protection against aggressive water chemistry,
which has been known to attack copper heat exchangers and cause premature
failure. Cupro-nickel offers superior tolerance to bad water chemistry
and increases erosion protection, thanks to a harder surface and wall
that is approximately 50% thicker than our standard copper fin tube.
When you're unsure of your ability to maintain the pool or spa water
chemistry, a cupro-nickel heat exchanger is a cost-effective way to
protect against premature failure. |
|
 |
| |
|
|
