|
Raypak
D-2
Power Vent
Compatible
for indoor or outdoor installation
For use with all Raypak 200,000 btu or more heaters.
Raypak
D-2
Power Vent
|
D-2
Power Vents
|
BTU
(1000s)
|
Natural
Gas
|
| |
|
|
185
- 265
|
|
|
|
|
|
335
- 405
|
|
|
|
|
|
Other
RayPak Heaters
|
| Compatible
for indoor or outdoor installation |
| For
use with all Raypak 200,000 btu or more heaters |
| Certified |
| The
D-2 Power Vent assembly is tested and certified to the latest
edition of the American National Standard ANSI Z21.56 for pool
heaters. |
| Through
the Wall Capable |
| The
D-2 Power Vent assembly is a Category III mechanical draft venting
system that operates with a positive vent static pressure and
with a vent gas temperature that avoids excessive condensate
production in the vent. All sizes are capable of relieving flue
gases up to a maximum of 40 equivalent feet of vent length.
All models have a 4” diameter exhaust. |
| Multi-Position |
Using
the supplied adjustable 90° elbow, the flue gases may be
discharged in any direction. Or simply remove the elbow for
vertical venting.
Dual Voltage Induced Draft Blower (120/240 VOLT) Factory set
for 240 volts. |
| Safety
at Its Best |
| The
D-2 Power Vent is equipped with a draft proving switch. This
switch insures that the blower is operating before operating
your heater. It is also equipped with a solid state control
that allows the blower to purge any residual gas buildup in
the heater after the heater has shut down. |
| |
The Raypak
D-2 Power Vent
Sometimes, equipment
rooms or unusual venting configurations require the use of a power
vent. Being the heater experts, we have the D2 Power Vent assembled
i a category III mechanical draft venting system that operates under
a positive static pressure and prevents excessive condensate production
in the vent. All sizes are capable of relieving the flue gases up
to a maximum of 100 equivalent feet of vent length. All models have
a standard 4" diameter exhaust connection. Using the Raypak-supplied
adjustable 90 degree elbow, the flue gases may be discharged in
any direction (see the D-2 Power Vent manual for details). The D-2
Power Vent is also dual-voltage capable (120/240 volts) and engineered
for long life and smooth operation.
|
