Categories

Newsletter

IntelliPro VS+SVRS Pump

IntelliPro VS+SVRS Pump

Pentair IntelliPro VS+SVRS Variable Speed Pump


The IntelliFlo VS+ SVRS and IntelliPro VS+ SVRS variable speed pump with the safety vacuum release system (SVRS) protection feature is well suited for all of your pool, spa, waterfall and other applications. The functionality of the IntelliFlo VS+ SVRS and IntelliPro VS+ SVRS pump is identical except for the pump’s external color. The IntelliFlo VS+ SVRS pump’s exterior case is almond color and the IntelliPro VS+ SVRS exterior case is black. The pump can use up to eight (8) speeds which can be adjusted to run at specific speeds and time intervals. The IntelliPro VS+ SVRS pump out performs all conventional pumps in its class. Advanced energy conservation features ensure that your filtration system is operating at peak efficiency. The pump operates at a maximum system flow rate of up to 174 gallons per minute (GPM). System setup for the SVRS requires that the suction vacuum level be adjusted to 25" of mercury (Hg) or less at the pump strainer housing connection. The pump can operate from 1100 RPM to 3450 RPM with preset speeds of 1100, 1500, 2350 and 3110 RPM. The pump can be adjusted from the control panel to run at any speed between 1100 RPM to 3450 RPM for different applications. The pump control panel alarm LED and error messages warn the user against under and over voltage, high temperature, over current, suction blockage and freeze protection with user defined minimum and maximum speed presets.
This pump is intended to be used as part of a complete pool safety system. It complies with the ASME/ANSI A112.19.17-2002 SVRS standard which defines how fast the pump must stop on a suction blockage event. This pump may not protect individuals from hair entrapment, limb entrapment or evisceration. The operator must ensure that all suction and return fittings are clean and unobstructed whenever the pump is started. Because SVRS protection is not enabled during priming mode, never allow anyone in the pool during priming mode. If SVRS auto restart is enabled and an SVRS event occurs, the pump is allowed to restart automatically after the preset time period. The operator must insure that any SVRS blockage event is quickly evaluated to confirm that all suction and return fittings are clean and unobstructed. When the pump restarts after a high vacuum event it will slowly ramp up to speed. If the pump senses a blockage it will shut down. The pump will attempt to soft prime 10 times before attempting a full prime.
Pentair IntelliPro VS+SVRS Variable Speed Pump
Product ID : P6E6XS4H-209L
$1,049.00
Pentair IntelliPro VS-3050 Variable Speed Pump (no SVRS)
Product ID : P6E6Y4H-209L
$895.00
1

Pentair IntelliPro VS+SVRS Variable Speed Pump