Categories

Newsletter

RayPak digital pool heater electronic ignition, 266,000 btu, natural gas

raypak pool heater digital natural gas
Click to enlarge
Price: $1,560.00
Product ID : P-R266A-EN

Purchase

Description

RayPak digital pool heater electronic ignition, 266,000 btu, natural gas - p-r206a-en

FREE SHIPPING

RayPak Digital Pool and Spa Heater Electronic Ignition Natural Gas 406,000 BTU


Fuel-Efficient:
Raypak pool and spa heaters consistently achieve the highest efficiency ratings. They exceed all federal and state standards for boiler and pool heater efficiency..

Stainless Steel Tube Sheet:
All Raypak heaters are fitted with stainless steel tube sheets with polymer headers. This allows for a completely nonferrous waterway, leaving your pool truly rust-free.

Copper Heat Exchanger:
The fin tubes of the heat exchanger are each made from a single piece of extruded copper. This integral-fin design allows maximum heat transfer to be attained and maintained. Cupro-nickel heat exchanger is also available for application that require corrosion/oxidation proof heater such as salt water system pools or commercial pools with constant high pH levels.

Durable Polymer Headers:
Standard Raypak heater comes with a Polymer headers which prevents metal rust stains from harming your pool’s surface, giving you years of trouble-free swimming pleasure.

Tough Exterior:
Raypak pool and spa heaters are designed with tough polyester-coated, non-corrosive cabinet material that is more durable than metal cabinets. Underneath the tough, yet beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service.

Wind-Resistant Design:
The Raypak gas heater is designed to draft naturally in outdoor installations with its exclusive low-profile design. No need for fans to combat drafting problems under normal conditions. It delivers uninterrupted heating performance regardless of falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc.

Ignition Source and Heater Control:
The Raypak gas heater are available with digital electronic ignition, or as a millivolt design. The digital system requires external power (120VAC or 240VAC) and generates a pilot only when there is a call for heat. It provides simple setup and easy programming, as well as easy-to-understand diagnostics and simple connections to remote controls. The millivolt ignition system does not require external power. It generates its' own current internally, with a small thermocouple driven by the constant pilot.
For additional information of how to select Raypak heater [click here]

RayPak Heater Model #
Heater Description
BTU
Gas Type
Free Shipping
0 - 2000 ft. Altitude
Standard Digital heaters
RayPak 206, Electronic
199,500
Natural Gas

RayPak 266, Electronic
266,000
Natural Gas

RayPak 336, Electronic
332,500
Natural Gas

RayPak 406, Electronic
399,000
Natural Gas

         
Raypak ASME Commercial Heaters
Commercial
Digital 206, ASME, commercial
199,500
Natural Gas

Digital 266, ASME, commercial
266,000
Natural Gas

Digital 336, ASME, commercial
332,500
Natural Gas

Digital 406, ASME, commercial
399,000
Natural Gas

RayPak Digital Commercial Heater w/ CuNickel Heat Exchanger
(2) meets requirement for installation in public pools
(3) can be used with salt water chlorine systems
Digital 206, ASME, commercial with Cupro-Nickel Heat Exc.
199,500
Natural Gas

Digital 266, ASME, commercial with Cupro-Nickel Heat Exc.
266,000
Natural Gas

Digital 336, ASME, commercial with Cupro-Nickel Heat Exc.
332,500
Natural Gas

Digital 406, ASME, commercial with Cupro-Nickel Heat Exc.
399,000
Natural Gas

Raypak 2000 - 5000 ft. Hi Altitude
Digital High Altitude heaters
** Shipping Applies
RayPak 206, Hi Alt
199,500
Natural Gas

RayPak 266, Hi Alt
266,000
Natural Gas

RayPak 336, Hi Alt
332,500
Natural Gas

RayPak 406, Hi Alt
399,000
Natural Gas

Raypak 0 - 2000 ft. Altitude
Digital Cupro-Nickel Models
FREE SHIPPING
RayPak 206, Cupro-Ni
199,500
Natural Gas

RayPak 266, Cupro-Ni
266,000
Natural Gas

RayPak 336, Cupro-Ni
332,500
Natural Gas

RayPak 406, Cupro-Ni
399,000
Natural Gas

Raypak 2000 - 5000 ft. Altitude
Digital Cupro-Nickel Hi Alt. Models
Shipping Applies
RayPak 206, Cupro-Ni, Hi Alt
199,500
Natural Gas

RayPak 266, Cupro-Ni, Hi Alt
266,000
Natural Gas

RayPak 336, Cupro-Ni, Hi Alt
332,500
Natural Gas

RayPak 406, Cupro-Ni, Hi Alt
399,000
Natural Gas


RayPak Heater Accessories

 

RAYPAK HEATER PARTS

Part # 010329F
 
Part # 006736F
 
Part # 010253F
 
Part # 009492F
 
Part # 010232F
 
 
 
 
RayPak replacement Honeywell gas valve for 207 - 407 heaters
Natural gas
 
RayPak replacement Transformer kit 120/240 v for all heaters
 
RayPak PC boad controller kit for the 207 - 407 heaters 3-wire
 
RayPak cotrol panel swith decal membrane 185-405, 206-407
 
RayPak heater pilot kit 207 -407 heaters

 

 

 

 

                 

RayPak outdoor High Wind Stack: High Wind Top Kits - In some areas where high winds are frequently experienced it may be necessary to install a Raypak High Wind Top. Installation of the High Wind Top will assist proper flueing of the heater and improve operation. High wind tops are available for all models xcept the Spartan 131, Premium 127 and 167.

The D-2 Power Vent is required for all indoor installation of the RayPak heaters. D-2 Power Vent is assembled as a category III mechanical draft venting system that operates under a positive static pressure and prevents excessive condensate production in the vent. All sizes are capable of relieving the flue gases up to a maximum of 100 equivalent feet of vent length. All models have a standard 4" diameter exhaust connection.

 

RayPak Heater Accessories

- D-2 Power Vent for 206/207 - 266/267 heaters Part # 009832

- D-2 Power Vent for 336/337 - 406/407 heaters Part # 009833


The Raypak D-2 Power Vent: Sometimes, equipment rooms or unusual venting configurations require the use of a power vent. Being the heater experts, we have the D2 Power Vent assembled in a category III mechanical draft venting system that operates under a positive static pressure and prevents excessive condensate production in the vent. All sizes are capable of relieving the flue gases up to a maximum of 100 equivalent feet of vent length. All models have a standard 4" diameter exhaust connection. Using the Raypak-supplied adjustable 90 degree elbow, the flue gases may be discharged in any direction (see the D-2 Power Vent manual for details). The D-2 Power Vent is also dual-voltage capable (120/240 volts) and engineered for long life and smooth operation.

 

RayPak Indoor / Outdoor Tops  

Idoor Stack Tops:
Raypak Indoor Stack Top 206/207 Heaters part# 009838
Raypak Indoor Stack Top 266/267 Heaters part# 009839
Raypak Indoor Stack Top 336/337 Heaters part# 009840
Raypak Indoor Stack Top 406/407 Heaters part# 009838

Outdoor High Wind tops:
Raypak Outdoor High Wind Top 206/207 Heaters part# 009834
Raypak Outdoor High Wind Top 266/267 Heaters part# 009835
Raypak Outdoor High Wind Top 336/337 Heaters part# 009836
Raypak Outdoor High Wind Top 406/407 Heaters part# 009837

Product Reviews

Login or Register to write the first review.