AQUA
Swimming Pool Supplies


 |   |   |   | | 
Best Discount prices

 

Replacement Parts for pool cleaner, filter & pump

 

Pool cleaner parts

Pool pump parts Pentair whisperFlo pump parts

HAYWARD NAVIGATOR PARTS
HAYWARD POOL VAC PARTS
HAYWARD PHANTOM PARTS
HAYWARD CLEANER ACCESSORIES
POLARS 380 CLEANER PARTS
POLARIS 360 CLEANER PARTS
POLARIS 280 CLEANER PARTS
KREEPY KRAULY CLEANER PARTS

Polaris 9300 Sport parts
GW9500 Cleaner parts

HAYWARD NORTSTAR PUMPPARTS
HAYWARD SUPER II PUMP PARTS
PENTAIR WHISPER FLO PUMP PARTS
POLARIS BOOSTER PUMP PARTS
POOL PUMP ACCESSORIES
VALVES AND ACCESSORIES

Pool Filter Parts

Backwash Valves & Unions

Hayward Pro-Grid DE filter Parts
Hayward SwimClear Pool Filter Parts
HAYWARD CARTRIDGE ELEMENT
Hayward PRO-GRID DE GRIDS
CLEAN & CLEAR CARTRIDGE ELEMENT
PENTAIR CLAM RETENSION KIT
HAYWARD BACKWASH VALVES
PVC PIPE UNIONS & COUPLINGS
PENTAIR BACKWASH VALVES
JANDY DIVERTER VALVES
RayPak Heater Parts

 

Hayward Navigator and Pool Vac Pool Cleaner Parts

Hayward® Navigator Pro™ Pool Cleaner Parts
REPLACEMENT PARTS FOR HAYWARD NAVOGATOR, POOL VAC AND PHANTOM TURBO CLEANERS


HAYWARD PHANTOM POOL CLEANER PARTS

 

 

POLARIS POOL CLEANER PARTS

 

POLARIS 380 CLEANER PARTS
 
POLARIS 280 CLEANER PARTS
 
POLARIS 360 CLEANER PARTS
POLARIS 360 CLEANER PARTS
POLARIS BOOSTER PUMP PARTS
             
 
 
Polaris 360 pool cleaner replacement parts

 

 

GW9500 Pool Cleaner Parts

     
GW9012 Swivel Assembly
GW9502 Bumper
GW9504 Screw Kit (4 short, 2 long)
GW9501 Shroud
GW9S0S Brush Ring Kit [Indudes Vacuum Skirt) N/A
GW9506 Oscilator Chamber Cap
GW9507 Cam Kit (2 & 3 Leg Cams)
GW9509 Idler Gear Kit (Includes 3 Gears)
GW9512 Block Kit (Includes 2 Blocks)
GW9513 Long Gear Shaft (Stainless Steel)
GW9536 Shaft Kit (Stainless Steel) I
GW9535 Lower Body
GW9517 Uft Brush
GW9508 Vacuum Skirt
GW9522 Uft Brush Spring
GW9523 Ratchet Tab (Stainless Steel)
GW9004 Oscillator Assembly Kit (Includes 2 Seals)
GW9503 Oscillator Assembly Kit (Includes Key #17, Ratchet Ass'y not sold separately
GW9013 Center Brush Kit (Set of 2)
GW9015 Reducer Cone
GW9019 Unidapt Handle
GW9530 Vac Port Fitting

 

Kreepy Krauly pool  cleaner parts
Kreepy Krauly parts list

 

 

Hayward Pool Pump Parts

 

NorthStar Pump Replacement Parts
(click on the Red outlined Areas to see/buy part)

 

Parts List

 

Hayward Super II Pump Replacement Parts

Click on the red outlined areas to see/buy part

 

Pentair WhisperFlo pump replacement parts

1
Clamp
2
Cover
3
Pot O-ring
4
Basket
5
Seal plate bolt
7
Motor plate bolt

357199

357151

350013

070430

070431

8
Nut, 3/8
9
Gasket
10
Housing
13
Diffuser
15
Impeller
16
Seal Assembly

071403

357102

350015

073126 1/2 hp
073127 3/4 hp
073128 1.0 hp
073129 1.5 hp
073130 2.0 hp

071734S

18
Seal Plate
19
Motor base/Foot
20
Foot insert
27
Motor
24
Drain plug
22
Hex Bolt

350201

070927

070929

075232S 1/2 hp
075233S 3/4 hp
075234S 1.0 hp
075235S 1.5 hp
075236S
2.0 hp
075237S 3.0 hp

071131

071406

 

WHISPERFLO PUMP 
Item No. Part No. WhisperFlo Pump Parts
1 357199 Clamp, Cam & Ramp, plastic, almond, WF/WFE
2 357151
Cover, clear, WFE pump
3 350013
O-ring pot flange WFE cover (post 11-98 pumps)
4 070387
Basket WF AQ, WFE
5 070430
Bolt, 3/8 -16 x 1-1/4 hex cap 18-8 SS, 4 req.
6 072184
Washer, 3/8 x 13/16 o.d. SS, 6 req.
7 070431
Bolt, 3/8 -16 x 2 hex cap 18-8 SS, 2 req.
8 071403
Nut, 3/8, 16 brass nickel plated, 2 req.
9 071445
O-ring parker No.2-265, WFE pump (pre 11-1998 pumps)
9 357100
Black Gasket for Seal plate (post 2-1-08 pumps)
9 357102
Almond gasket for seal plate (pre 2-1-08 pumps)
10 357149
Volute, WFE pump & pot (Replaces 074565) Seal Plate, (post 11-98 pumps)
10 350015
Housing, WFE pump & pot, almond (post 11-98 pumps)
11 071444
O-ring #238 parker, WFE pump
12 071660
Screw set, 4-40 x 1-1/8 WFE sckt cap 18-8 SS, 2 req.
13 072928
Diffuser assembly, WFE-12, 3 HP only
13 072927
Diffuser assembly, WFE-2–8, 1/2 HP – 2.5 HP
14 071652
Screw, 1/4, 20x1 LH phillips pan MS 18-8 S/S
15 175713
Impeller, washer gasket
16 071734S
Seal PA-7 w/ceramic seat, PS1000
17 070429
Bolt 3/8 16 x 7/8 SS hex hd., 4 req.
18 350201
Seal Plate Kit WFE Almond (Includes Mechanical Seal installed)
18 350101
Seal Plate Kit (Includes Mechanical Seal installed)
19 070927
Foot WF, pump motor support almond
20 070929
Foot insert WF pump almond
21 071657
Screw, 1/4, 20 x 1 in.hex cap 18-8 SS, 2 req.
22 071406
Nut, 1/4, 20 hex. hd. SS, 2 req.
23 072183
Washer, flat 1/4 x 5/8 20 GA thick 18-8 SS, 2 req.
24 071131
Plug drain WFE, almond, 2 req.
25 192115
O-ring, drain plug 2 req.
26 357149
Volute, WFE pump & pot (Replaces 074565) (post 11-98 pumps)
 
Item No. Part No. Pentair WhisperFlo pump replacement motor
27 075232S
Motor SQFL, 1/2 HP F, 3/4 A, 1phase,60 Hz, STD, 230/115V, almond
27 075233S
Motor SQFL, 3/4 HP F, 1A, 1 phase, 60 Hz, STD, 230/115V, almond
27 075234S
Motor SQFL, 1 HP F, 1.5 A, 1 phase, 60 Hz, STD, 230/115V, almond
27 075235S
Motor SQFL, 1.5 HP F, 2 A, 1 phase, 60
27 071320S
Motor 2 HP Motor SQFL, 2 Speed, 1 phase, 60 Hz
27 071321S
Motor SQFL, 2 HP F, 2.5 A, 1 phase, 60 Hz, 2 speed, 230V, almond
27 075236S
Motor 2 HP F, 2-1/2 HP uprated, std., sq. flg., almond
27 071317S
Motor 3 HP F, E , sq. flg,. almond
27 075237S
Motor 3 HP F, 230 Volt, almond
IMPELLERS 
Item No. Part No. Pentair WhisperFlo Pump Impeller
28 073126 Impeller for WhisperFo WFE-2 1/2 HP pump
28 073127 Impeller for WhisperFo WFE-3 3/4 HP pump
28 073128 Impeller for WhisperFo WFE-4 1 HP pump
28 073129 Impeller for WhisperFo WFE-6 1 1/2 HP pump
28 073130 Impeller for WhisperFo WFE-8 2 HP pump
28 073131 Impeller for WhisperFo WFE-12 3 HP pump

POWER END SUB ASSEMBLY INCLUDES ITEMS No. 12 THRU 18, 27, 28 

SPX4020AA SPX4000B Hayward Northstar Drain Plug  and Gasket SPX4000B Hayward NorthStar Diffuser Hayward NorthStar pump mounting base Hayward NorthStar pump seal plate you need to replace this if you're replacing the impeller Hayward NorthStar pump seal plate O-ring Hayward NorthStar pump seal assembly (2003 and later) Hyaward Northstar pump motor mounting plate Hayward NorthStar pump motor cap screw part SPX0125Z44 Hayward NorthStar pump Impeller ring  SPX3021R Hayward NorthStar motor lock ring SPX4000K Hayward NorthStar pump motor for 1/2 HP pump Hayward NorthStar pump 3/4 HP motor Hayward Northstar 1 H.P. motor Hayward Northstar 1.5 HP pump motor Hayward Northstar pump 2 HP motor Hayward NorthStar pump 3 HP motor Hayward Northstar pump 1/2 HP impeller Hayward Northstar pump 3/4 HP impeller Hayward Northstar pump 1 HP impeller Hayward Northstar pump 1.5 HP impeller Hayward Northstar pump 2 HP impeller Hayward Northstar pump 3 HP impeller Hayward Northstar pump mounting foot cap screw

 

HAYWARD FILTER REPLACEMENT ELEMENTS

 

Model # Description Diameter (outside) Height
Hayward
CX225RE 25 sq. ft.- for MICRO STAR-CLEAR C225 series
4 3/4"
11 13/16"
CX250RE 25 sq. ft.- for MICRO STAR-CLEAR 250 series
7"
9 3/4"
CX410RE 40 sq. ft.- for EASY-CLEAR C400 series
7"
14 1/8"
CX500RE 50 sq. ft.- for EASY-CARE C500 series
7"
19 7/16"
CX550RE 55 sq. ft.- for EASY-CAREC500 series
7"
19 5/8"
CX480XRE** 56.25 sq. ft.- for SwimClear C2020, C2025, C2000 series
7"
13 7/8"
CX580XRE** 76.25 sq. ft.- for SwimClear C3020, C3025, C3000 series
7"
19 7/16"
CX880XRE** 106.25 sq. ft.- for SwimClear C4020, C4025, C4000 series
7"
25 1/4"
CX875RE** 112.5 sq. ft.- for SwimClear C4500 series
7"
25 1/2"
CX1280XRE** 131.25 sq. ft.- for SwimClear C5020, C5025, C5000 series
7"
32 13/16"
CX750RE 75 sq. ft.- for STAR-CLEAR C750 series
7"
29 7/16"
CX760RE 75 sq. ft.- for STAR-CLEAR C751 series
9 1/16"

17 3/8"

CX800RE*** 75 sq. ft.- for STAR-CLEAR II C800, C1500 series
8 1/2"
17 3/8"
CX850RE 85 sq. ft.- for ASL SERIES C850 series
9 5/8"
14 1/4"
CX900RE 90 sq. ft.- for STAR-CLEAR PLUS C900 series
9 1/16"
17 3/8"
CX1000RE 100 sq. ft.- for C100 series
7"
29 7/16"
CCX1000CC 100 sq. ft.- for CC1000 series
9"
17 5/8"
CX1100RE 100 sq. ft.- for STAR-CLEAR II C1100 series
8 1/2"
23 3/16"
CX1200RE 120 sq. ft.- for STAR-CLEAR PLUS C1200 series
9 1/6"
23 3/16"
CX1250RE 120 sq. ft.- for ASL C1250 series
9 5/8"
19 5/8"
CX1380RE** 137.5 sq. ft.- for C5500 seies
7"
32 13/16"
CCX1500RE 150 sq. ft.- for CC1500 seies
9"
23 5/16"
CX1750RE 175 sq. ft.- for STAR-CLEAR PLUS C1750 series
9"
28 1/2"
CX1900RE 190 sq. ft.- for STAR-CLEAR PLUS C1900 series
9"
28 1/2"
** 4 cartridges required for use
*** 2 cartridges required for use

 

 

 

Hayward Pro-Grid D.E. Filter Replacement Parts




 

 

Part #
Pro-Grid DE filter replacement parts
1

Manual Air relief valve with o-ring

2

Manual Air Relief assembly

3
Back Mount Pressure Gauge 0-60 psi

4

O-ring kit set of 2

5
Manual air relief valve nut
6a
Filter head DE2420
6b

Fiter head DE3620

6c

Fitler head DE4820

6d
Filter head DE6020
6e

Filter head DE7220

8
Clamp system including: clamp, nut, bolt, metal seal

9
Clamp bolt and nut

11

Metal reinforcement seal

12

Retainer nut 5/16" - 18

13
Washer 5/16" 2 req.
14

Top collar manifold with flex relief assembly

15a
Retainer rod DE2420
15b
Retainer rod DE3620
15c

Retainer rod DE4820

15d

Retainer rod DE6020

15e
Retainer rod de7220

16

Flex Air relief assembly

17
Outlet Elbow O-ring

18a
Outlet Elbow Assembly with o-ring DE2420

18b

Outlet Elbow Assembly with o-ring DE3620

18c

Outlet Elbow Assembly with o-ring DE4820

18d
Outlet Elbow Assembly with o-ring DE6020
18e

Outlet Elbow Assembly with o-ring DE7220

19a

Filter element grid full req. 7 for DE2420

19b

Filter element grid full req. 7 for DE3620

19c
Filter element grid full req. 7 for DE4820
19d

Filter element grid full req. 7 for DE6020

19e
Filter element grid full req. 7 for DE7220
21a
Filter element grid partial req. 1 for DE2420

21b
Filter element grid partial req. 1 for DE3620

21c
Filter element grid partial req. 1 for DE4820

21d
Filter element grid partial req. 1 for DE6020
21e
Filter element grid partial req. 1 for DE7220
22
Inlet Elbow
23
Element Spacer (DE2420 only)
24
Filter element locator
25
Bulkhead O-ring 2 req.
26
bulkhead fitting 2. req
27
Filter body with clamp
28
1 1/2" Drain Plug with O-ring
29
Strap kit 2 straps, 2 screws (optional)
30
O-ring 2 req.
31a
Selectra-Flo 4-position backwash valve
32c
Vari-Flo 6-position backwash valve 1 1/2" pipe
33b
Vari-Flo 6-position backwash valve 2" pipe
32
Slide valve assembly 2" SKT

 

 

 

Pressure guage 60 psi top mount for Star Clear filters Part # ECX27091
Pressure guage 60 psi top mount for Pro-Grid and Swim-Clear filters Part # ECX2712B1

 

Hayward Pro-Grid filter backwash valves SP0740DE multiport 4-position SP0715XR50 multi-port 2 in. six position SP0710XR50 multi-port 1.5 in. six position backwash valves
Hayward Pro-Grid filter backwash valve SP0410X502S 2 in. slide valve two position

 

Replacement D.E. Grids for Hayward Pro-Grid D.E. Filters

Model
Pro-Grid D.E. grids full (7 req)
Buy One
Pro-Grid D.E. grids partial (1 req)
Buy One
DE2420 -


DE3620 -


DE4820 -


DE6020 -


DE7220 -



 

 

 

Hayward Pro-Grid D.E. Filter
Model #
Fliter Area (Sq. ft.)
DE Required
Flow Rate (GPM)
Turnover Rate (gallons)
@ 6 hrs.
@ 8 hrs.
24
3.0 lbs.
48
23,040
28,800
36
4.5 lbs.
72
34,560
43,200
48
6.0 lbs.
96
46,080
57,600
60
7.5 lbs.
120
57,600
72,000
72
9.0 lbs.
144
69,120
86,400

 

Hayward SwimClear Filter - Replacement Parts


Part #
Description
1

PRESSURE GUAGE

2

0-RING KIT (2)

3
AIR RELIEF VALVE NUT

4

MANUAL AIR RELIEF WITGH O-RING

5
MANUAL AIR RELIEF ASSEMBLY
6a
UPPER FILTER BODY C2020/C2025
6b
UPPER FILTER BODY C3020/C3025
6c
UPPER FILTER BODY C4020/C4025
6d
UPPER FILTER BODY C5020/C5025
6e
FILTER HEAD C7000 SERIES
7
CLAMP BOLT AND NUT
8
CLAM ASSEMB. W/ CLAMP NUT & BOLT
9
METAL REINFORCED SEAL
10a
TO MANIFOLD C2020/C2025
10c
TO MANIFOLD C3020/C3025/4025
10c
TO MANIFOLD C5020/C5025
11
AIR RELIEF FILTER
12
AIR RELIEF TUBE
13a
CARTRIDGE ELEMENT C2030/C2025
13b
CARTRIDGE ELEMENT C3030/C3025
13c
CARTRIDGE ELEMENT C4030/C4025
13d
CARTRIDGE ELEMENT C5030/C5025
14
0-RING
15a
OUTFLOW W/ PIPE C2030/C2025
15b
OUTFLOW W/ PIPE C3030/C3025
15c
OUTFLOW W/ PIPE C4030/C4025
15d
OUTFLOW W/ PIPE C5030/C5025
15e
OUTFLOW W/ PIPE C7000 SERIES
17
BOTTOM SEAL PLATE
18
LOWER FILTER BODY
19
1/2" DRAIN PLUG W/ O-RING
22
BULKHEAD FITTING
23
UNION GASKET
24
UNION CONNECTION KIT

 

PRESSURE GUAGE 60 psi

Pressure guage 60 psi top mount for Star Clear filters Part # ECX27091
Pressure guage 60 psi top mount for Pro-Grid and Swim-Clear filters Part # ECX2712B1

 

Hayward Pro-Grid D.E. Grids

D.E. Filter
Replacement Grid (full)
Buy One
Replacement Grid (partial)
Buy One
DE2420 - 24 sq. ft.


DE3620 - 36 sq. ft.


DE4820 - 48 sq. ft.


DE6020 - 60 sq. ft.


DE7220 - 72 sq. ft.


 

CLEAN AND CLEAR CARTRIDGE ELEMENTS

   
Clean & Clear / Predator Cartridge Elements
Part #
Clean & Clear 50 - 50 sq. ft.
Clean & Clear 75 - 75sq. ft.
Clean & Clear 100 - 100 sq. ft.
Clean & Clear 150 - 150 sq. ft.
Clean & Clear 200 - 200 sq. ft.
   
Clean & Clear Plus Cartridge Elements
Part #
Clean & Clear Plus 240 sq. ft. 4 required
Clean & Clear Plus 320 sq. ft. 4 required
Clean & Clear Plus 420 sq. ft. 4 required
Clean & Clear Plus 520 sq. ft. 4 required

 

 


Replacement Parts for the Clean & Clear Filter

Pentair Clean and CLear clamp kit tension control Part # 190003
Spring Barrel Nut assembly Part # 53108900

Pool Piping Accessories

 
 
 
Half Unions for connecting pump to PVC pipe. Allows you to disconnect your pool/spa pump with out cutting PVC pipe.
2" SLIP x SLIP
1 1/2" SLIP x 1 1/2" SLIP
 

2" MIP x 2" SLIP
1 1/2" MIP x 1 1/2" SLIP
 

 
Couplings for connecting your PVC pipe to pump threaded part will screew in to the pump suction or return and you slip you PVC in to the other end.
Coupler 2" SLIP x 2" MPT for 2" PVC pipe
Coupler 1 1/2" SLIP x 1 1/2" MPT for 1 1/2" PVC pipe
 

CPVC pipe 2" threaded ends - cut-in-half and use for pump suction/return
CPVC pipe 1 1/2" threaded ends - cut-in-half and use for pump suction/return
 
Spring-Loaded Check Valves: When two or more pounds of water pressure is applied the spring-loaded gate opens. The valve relys on a small internal spring to close the disc whenever water is not moving in the intended direction.
Spring-loaded check valve 1/2 lb. pressure 2" pipe
Spring-loaded check valve 1/2 lb. pressure 1 1/2" pipe
 
Check Valve: these valves insure that water flows in one direction only and prevent back-flow when pool/spa pump is turned off
7235 - 1 1/2" - 2" 180 degree Jandy check valve
7305 - 2" - 2 1/2" 180 degree Jandy check valve
7511 - 1 1/2" - 2" 90 degree Jandy check valve
7512 - 2" - 2 1/2" 90 degree Jandy check valve
 
Lubricants and sealants for wet bearings, motors, pumps, O-rings. It protects metal and plastic (PVC) from common pool chemicals and salt
Aqua Shield Lubricant for pump strainer O-ring 8 oz.
Hayward pool pump part

 

 

HAYWARD Pool Filter Backwash Valves

Hayward VariFlo XL top-mount sand filter backwash valve

Model
Valve Positions
Pipe Size
Color
Mount Position
Closure Design
6
1 1/2" FIP
Black
Top
Clamp
 

Hayward six position multiport DE filter valve

Model
Valve Positions
Pipe Size
Color
Mount Position
Closure Design
6
2" FIP
Black
side
Clamp
6
1 1/2" FIP
Black
side
Clamp
 

Hayward Selectra-Flo four position DE filter valve

Model
Valve Positions
Pipe Size
Color
Mount Position
Closure Design
4
2" SKT
Black
side
Clamp

Hayward® Vari-Flo SP0710X62 multiport valve to backwash sand filters side-mount

Model

Hayward® Vari-Flo™ SP0710X62
- Hayward Vari-Flo 1-1/2" Vari-Flo for side-mount sand filters: S210S, S244S, S311SX, S311SXV, S360SX

Hayward® Vari-Flo SP0410X602 slide valve to backwash sand filters side-mount

 

Hayward® Vari-Flo™ SP0410X602 - Hayward Slide Valve 2" 2-position valve for side-mount sand filters:S210S, S244S, S311SX, S311SXV, S360SX


 

PENTAIR BACKWASH VALVES

Pre-plumbed push pull side mount valve complete with bulkhead unions for simple installations with filters. Comes in 2" socket.

Pre-plumbed Valves for For D.E. and High-Rate Sand Filters

Pre-plumbed push pull side mount valve complete with bulkhead unions for simple installations with filters. Comes in 2" socket.

Model Description
50290211 2" ABS push pull valve with couplings
 
Pre-plumbed Pentair pool filter Valves for For D.E. and Sand Filters.

Pre-plumbed Valves for For D.E. and Sand Filters

Model Description
261173 1 1/2" MPV Pre-plumbed side mount for sand filters
261055 2" MPV Pre-plumbed side mount for sand filters
261177 1 1/2" MPV Pre-plumbed side mount for D. E. filters
261152 2" MPV Pre-plumbed side mount for D. E. filters
 
Pre-plumbed Valves for For D.E. and Sand Filters for Pentair Sand and D. E. filters
Model Description
261050 2" w/bulkhead pre-plumbed side mount for sand filters
261142 2" w/bulkhead pre-plumbed side mount for D. E. filters
 
Pre-plumbed Valves for For D.E. and Sand Filters
Model Description
263027 2-way 2" x 2 1/2" CPVC
263036 2-way 1 1/2" x 2" CPVC
 
Multiport side-mounted backwash valves for side mounted Sand and D.E. filters.

HiFlow Multiport Backwash Valves

Multiport side-mounted backwash valves for side mounted Sand and D.E. filters.

Model Description
261049 2" HiFlow Valve, no plumbing

Multiport top-mounted backwash valves for Eclipse and Meteor High-rate sand filters.

Top Mount Multiport Valves

Multiport top-mounted backwash valves for Eclipse and Meteor High-rate sand filters.

Model Description
50118100 8-pos. 18 in and 20 in Meteor filters, 1 1/2"
50118200 8-pos. 22in Eclipse / Meteor
50118300 8-pos 1 1/2" in. threaded, 26 and 36 in. filters
50123100 2" threded, 30 in. filters

Top mounted TA (Tagelus) Valves  backwash valves for top mount sand filters.

Top mounted TA (Tagelus) Valves

1 1/2" and 2" backwash valves for top mount sand filters.

Model Description
261124 1 1/2" TA valve, V thread
261130 1 1/2" TA valve, buttress threaded
262505 1 1/2" TA to TA D conversion kit with valve
262506 1 1/2" TA D (TA 30/40/50/60D filters), clamp
261185 2" TA D (TA 100D filter only), clamp

 


Pre-plumbed Valves for For D.E. and High-Rate Sand Filters.

Pre-plumbed Valves for For D.E. and High-Rate Sand Filters

Model Description
50181211 1 1/2" Pre-plumbed side mount multiport valve 26, 30, 36 inch Eclipse filters
50181211 2" Pre-plumbed side mount multiport valve for 26, 30, 36 inch Eclipse filters
 
Pentair diverter valves two way  way  CPVC
Model Description
263027 2-way 2" x 2 1/2" CPVC diverter valves
263036 2-way 1 1/2" x 2" CPVC diverter valves
 
Pentair diverter valves three way CPVC
Model Description
263026 3-way 2" x 2 1/2" CPVC diverter valves
263035 3-way 1 1/2" x 2" CPVC diverter valvess
 
Pentair diverter valves two way PVC
Model Description
263029 2-way 2" x 2 1/2" PVC diverter valves
263038 2-way 1 1/2" x 2" PVC diverter valves
 
Pentair diverter valves  three way PVC
Model Description
263028 3-way 2" x 2 1/2" PVC diverter valves
263037 3-way 1 1/2" x 2" PVC diverter valves

 

Jandy Diverter Valves and Ball Valves

Jandy Diverter and Check Valves

Hayward Backwash Valves

SP0715XR50 - SP0710XR50 - SP0410X502S - DE2400PAK2CS - SP0714T

 
SwimQuip Unions and Couplings
Generic Unions and Couplings
Pool Filter Backwash Hose 2" x 25ft. w/ clip
Pool Filter Backwash valves - Multiport & Slide Valve

SP0714T: | SP0715XR50 | SP0710XR50 | SP0740DE | SP0710X62 | SP0410X602| 261047 | 50290211 | 261173 | 261055 | 261177 | 261152 | | 261050 | 261142 | 263027 | 263036 | 261049 | 50118100 | 50118200 | 50118300 | 50123100 | 261124 | 261130 | 262505 | 262506 | 261185 | 50181211 | 50181211 | 263027 | 263036 | 263026 | 263035 | 263029 | 263038 | 263028 | 263037 | R172288 |


Jandy Ball Valves
Jandy Gold Standard Ball Valve 3/4" Non-Union
#6952
Jandy Gold Standard Ball Valve 1" Non-Union
#6953
Jandy Gold Standard Ball Valve 1 1/2" Non-Union
#6954
Jandy Gold Standard Ball Valve 1 1/2" Standard Union
#6955
Jandy Gold Standard Ball Valve 2" Non-Union
#6956
Jandy Gold Standard Ball Valve 2" Standard Union
#6957
Jandy Gold Standard Ball Valve 3" Non-Union
#7515
Jandy Gold Standard Ball Valve 4" Non-Union
#7516

Half Unions and Couplings
Jandy Check Valve 7235 1 1/2" - 2" 180 degree
#7235
Jandy Check Valve 7305 - 2" - 2 1/2" 180 degree
#7305
Jandy Check Valve 7511 - 1 1/2" - 2" - 90 degree
#7511
Jandy Check Valve 7512 - 2" - 2 1/2" - 90 degree
#7512
Half Union 2" SLIP x 2" SLIP
#113460
Half Union 2" MIP x 2" SLIP
#113560
Half Union 1 1/2" MIP X 2" SLIP
#113540
Half Union 1 1/2" SLIP X 1 1/2" SLIP
#113440
Intermatic pool/spa timer clock switches and controls
Pool/Spa Timer Clocks

T101M Replacement internal mechanism 110 v metal -
T104M Replacement internal mechanism 220 v metal -
T101R Indoor/outdoor timer 110 v single circuit metal case -
T101P Indoor/outdoor timer 110 v single circuit plastic case -
T104R Indoor/outdoor timer 220 v single circuit metal case -
T104P Indoor/outdoor timer 220 v single circuit plastic case -
T101P201 Intermatic timer w/ Fireman's Switch 125 v two circuit plastic case -
T101R201 Intermatic timer w/ Fireman's Switch 125 v two circuit metal case -
T104P201 Intermatic timer w/ Fireman's Switch 208 v two circuit plastic case -
T104R201 Intermatic timer w/ Fireman's Switch 208 v two circuit metal case -
PF1102T Indoor/outdoor timer 240 v single circuit freeze protection -
PF1103T Indoor/outdoor timer 120/240 v single circuit freeze protection -

 

RAYPAK HEATER PARTS

Part # 010329F
Part # 006736F
Part # 010253F
Part # 009492F
Part # 010232F
 
 
 
 
RayPak replacement Honeywell gas valve for 207 - 407 heaters
Natural gas
 
RayPak replacement Transformer kit 120/240 v for all heaters
 
RayPak PC boad controller kit for the 207 - 407 heaters 3-wire
 
RayPak cotrol panel swith decal membrane 185-405, 206-407
 
RayPak heater pilot kit 207 -407 heaters

 

 

 

 

 
 
 
 

 

RayPak outdoor High Wind Stack: High Wind Top Kits - In some areas where high winds are frequently experienced it may be necessary to install a Raypak High Wind Top. Installation of the High Wind Top will assist proper flueing of the heater and improve operation. High wind tops are available for all models xcept the Spartan 131, Premium 127 and 167.

- High Wind Stack for 206/207 009834
$79.00
- High Wind Stack 266/267 009835
$79.00
- High Wind Stack 336/337 009836
$79.00
- High Wind Stack 406/407 009837
$79.00

The D-2 Power Vent is required for all indoor installation of the RayPak heaters. D-2 Power Vent is assembled as a category III mechanical draft venting system that operates under a positive static pressure and prevents excessive condensate production in the vent. All sizes are capable of relieving the flue gases up to a maximum of 100 equivalent feet of vent length. All models have a standard 4" diameter exhaust connection.

- D-2 Power Vent for 206/207 heaters
- D-2 Power Vent for 366-407 heaters

RayPak Versa Indoor / Outdoor tops

Raypak versa indoor and outdoor tops part # 003709 003722 004897 and 004301

RayPak Versa  outdoor top part # 003709

Outdoor Top Part # 003709 for Versa 55 $49.00

RayPak Versa 105 Outdoor Top shipped with unit

RayPak versa 55 heater indoor stack top for versa 55 and versa 105 pool/spa heaters

 

Indoor Stack Top for Versa 55 $39.00

Indoor Stack top for Versa 105 $39.00

 

RayPak D2 Power Vent

Raypak D-2  Power Vent for the RP2100 pool and spa heaters

D-2 Power Vents

BTU (1000s)
Natural Gas
   
185 - 265
335 - 405

The Raypak D-2 Power Vent: Sometimes, equipment rooms or unusual venting configurations require the use of a power vent. Being the heater experts, we have the D2 Power Vent assembled i a category III mechanical draft venting system that operates under a positive static pressure and prevents excessive condensate production in the vent. All sizes are capable of relieving the flue gases up to a maximum of 100 equivalent feet of vent length. All models have a standard 4" diameter exhaust connection. Using the Raypak-supplied adjustable 90 degree elbow, the flue gases may be discharged in any direction (see the D-2 Power Vent manual for details). The D-2 Power Vent is also dual-voltage capable (120/240 volts) and engineered for long life and smooth operation.

 

 


Pool Cleaners
bullet Hayward Pool Cleaners
bullet Pentair Pool Cleaners
bullet Polaris Pool Cleaners
bullet Zodiac Pool Cleaners

Pool Heaters
bullet Hayward Pool Heaters
bullet Jandy Pool Heaters
bullet Pentair Pool Heaters
bullet RayPak Pool Heaters

Pool Pumps
bullet Hayward Pool Pumps
bullet Jandy Pool Pumps
bullet Pentair Pool Pumps
bullet Sta-Rite Pool Pumps

Pool Filters
bullet Hayward Pool Filters
bullet Jandy Pool Filters
bullet Pentair Pool Filters
bullet Sta-Rite Pool Filters

Salt Chlorinators
bullet Jandy AquaPure
bullet Jandy PureLink
bullet Goldline AquaRite
bullet Goldline Aqua Rite Pro
bullet Pentair IntelliChlor
bullet Zodiac LM3
bullet Zodiac DuoClear

Automation/Control
bullet Goldline Aqua Logic
bullet Goldline Pro Logic
bullet Goldline Aqua Pod
bullet Jandy AquaLink RS
bullet Jandy AquaLink PDA
bullet Pentair IntelliTouch


Pool/Spa Lights
bullet Color Logic Pool Lights
bullet Color Logic Spa Lights
bullet Hayward Astro Lite
bullet Pentair Amerlite
bullet Pentair SAM/SAL Lights
bullet Pentair SpaBrite
bullet Pool Light Niches

Pool Accessories
bullet Pool/Spa Blowers
bullet Pool Automatic Skimmers
bullet Pool Chlorine Feeders
bullet Pool Thermometers
bullet Pool/Spa Brushes
bullet Intermatic Timer Switches
bullet Pool Vacuum Heads
bullet PVC Pipes & Couplings
bullet Pool Fence
bullet Backwash Valves
bullet Mineral Sanitizers

Replacement Parts
bullet Hayward Cleaner Parts
bullet Polaris Cleaner Parts
bullet Kreepy Krauly Parts
bullet Hayward Pump Parts
bullet Filter Valves

Pool Games/Toys
bullet Pool Lounges
bullet Pool volleyball Game
bullet Pool Basketball Game
bullet Pool Vacuum Heads
bullet Baby Floats
bullet Swim Boards
bullet Pool Mattress
bullet Pool Water Tube

Pool Chemicals
bullet Sanitizers
bullet Algaecides
bullet Water Test Kits
bullet Water Treatment Guide

Terms/Policies
bullet Sales Policy
bullet Shipping Policy
bullet Return Policy
bullet Link Disclaimer
bullet Testimonials
bullet Credit Card Form
bullet CA Tax Forms
bullet Contact Us

 

  Hayward Navigator pool cleaner parts and accessories Hayward Phantom pool cleaner parts Polaris 380 pool claner parts Polaris 280 pool cleaner parts Polaris booster pump replacement parts Kreepy Krauly pool cleaner parts Kreepy Krauly automatic pool cleaner replacement parts Manual Air relief valve with o-ring Manual Air Relief assembly Back Mount Pressure Gauge 0-60 psi Pro-Grid and Swim Clear filter O-ring kit set of 2 Hayward pro-grid and swim-clear Clamp system including: clamp, nut, bolt, metal seal Pro-grid and Swim-clear top manifold http://www.aquapoolstore.com/SP0410X502S.html Hayward Pro-Grid Pool Filter parts