Super Stain Treat for Fiberglass pools 2.5 lbs.

Super Stain Treat for Fiberglass pools 2.5 lbs.
Click to enlarge
Price: $39.95
Product ID : SST-C12




Super Stain Treat®™ Fiberglass Stain Remover

The best solution for removing stains from fiberglass surface

Super Stain Treat® is a very effective stain remover specifically designed for fiberglass pools and pools with delicate custom finishes. Most stain treatments have harsh chemicals that can damage delicate surfaces such as vinyl and fiberglass. Super Stain Treat® does not damage the pol surface and is safe to swim-in in one hour after applying the initial stain treatment.

2.5 lbs. Treats 15,000 gallons of pool water
Super Stain Treat® 2.5 lbs.

Free Shipping


Super Stain Treat® removes stain safely without damaging pool surface

Fast startup, cleanup and maintain
Pool Heater sale with free shipping Removes stains from fiberglass surface (use on pools, boats,)
Pool Heater sale with free shipping Formulated specifically for use on fiberglass surface
Pool Heater sale with free shipping Ideal for starting up your new pool to protect stains from forming
Pool Heater sale with free shipping Fast acting formula that you can swim in the pool in just after one hour
Pool Heater sale with free shipping Perfect for soft-side pools at startup!

How to use Super Stain Treat®

It is important that directions for this product be followed as closely as possible in order to achieve the desired results. If all directions are followed, stain removal will follow quickly and effortlessly.

Pool Heater sale with free shipping Pool chlorine level should be 0.3 PPM before treatment with this product. (Chlorine level should be reduced during the use of Super Stain Treat® )
Pool Heater sale with free shipping Before turning on the pump, pool water should be balanced according to the dealer or manufacturer guidelines, but pH must below 7.2 for Super Stain Treat® to work at highest effectiveness. After treatment cycle with Super Stain Treat® is completed, rest pool pH level to proper level as indicated in the chart below.
Pool Heater sale with free shipping DOSAGE: Each 2.5 lbs. Container of Super Stain Treat® treats 15,000 gals. Of water. Purchase additional containers for larger pools
Pool Heater sale with free shipping After one hour brush pool. Check pH before turning on pump.
Pool Heater sale with free shipping After 4 days, add 1-2 lbs. OfSuper Stain Treat® to pool water per 20,000 gals.


Balancing Pool Water Chemistry

Basic Pool Water Chemistry Facts you need to know:

The water chemistry balance of swimming pool changes daily due to use of pool, weather condition, addition of sanitizing chemicals, and runoff.
Improper chemistry balance can cause corrosion, scaling and deposits to the pool walls and equipment. Corrosion and scaling can be difficult and expensive to fix once formed. Maintaining the correct chemical balance in your pool/spa will keep the pool/spa sanitary, and prevent costly repairs to pool or equipment. Use our 4-way pool/spa watertest kit to check for Chlorine, pH, Alkalinity and Conditioner levels.

Effect of Low Levels Effect of High Levels
Chlorine 1 - 3 ppm hazy water, algea growth,
bacteria causing infections
Swimmer irritation, bleaching of clothes/hair,
corrosive to heat exchanger
Bromine 2 - 4 ppm hazy water, algea growth,
bacteria causing infections
Swimmer irritation, bleaching of clothes/hair,
corrosive to heat exchanger
pH 7.4 - 7.6 corrodes metal parts,
swimmer irritation
cloudy water, scaling of heat exchanger,
reduced sanitizer effectiveness
Total Alkalinity 80 - 120 ppm corrodes metal parts,
large fluctuations in pH
scaling of heat exchanger
Calcium Hardness 200 - 400 ppm corrodes metal parts, scaling of heat exchanger
Salt 2700 - 5000 ppm poor salt chlorinator performance, low chlorine corrodes metal parts,

For your health and the protection of your pool equipment, it is essential that your water be chemically balanced. The following levels must be used as a guide for balanced water.

Recommended Level(s) Fiberglass Pools Fiberglass Spas Other Pool & Spa
Water Temp. (Deg. F) 68 to 88 89 to 104 68 to 104
pH 7.3 to 7.4 7.3 to 7.4 7.6 to 7.8
Total Alkalinity (PPM) 120 to 150 120 to 150 80 to 120
Calcium Hardness (PPM) 200 to 300 150 to 200 200 to 400
Free Chlorine (PPM)* 2 to 3 2 to 3 2 to 3
Total Dissolved Solids (PPM) 3000 MAXIMUM** 3000 MAXIMUM** 3000 MAXIMUM**

* Free Chlorine MUST NOT EXCEED 5 PPM!Remember excessively corrosive water can void pool heater warranty!Pool Start Up:-- Before starting up your pool for a new season, clean dirt and debris from the pool, clean pool filter by removing cartridges or DE grids and soaking them with mild chlorine solution, rinse throughly and let dry before reassembling filter. Balance pool water before installing DuoClear cartridge


pH 7.4 - 7.8
Calcium Hardness 200 - 400 ppm
Total Alkalinity 80 - 150 ppm
Balance the Water:To make sure your pool water is properly balanced, take a sample of your pool water to your local pool store and have it tested, take any necessary actions to make sure your water is balanced.


How do I balance my water chemistry?

Product Reviews

Login or Register to write the first review.

Products You May Like

Natural Chemistry Clear Clarifier 32 Oz
Product ID : 03555
Hot Deal
Fiber Clear DE media 7 lbs.
Product ID : fib7
Hot Deal
Bio-Dex 300 Swimming Pool Tile Cleaner 1 QT. (32 OZ)
Product ID : biodex300
Hot Deal
Natural Chemistry PHOSFree 2 Liters
Product ID : 05221
Hot Deal
Natural Chemistry Spa Purge 1 liter
Product ID : 04137
Hot Deal